Conical Screw Mixer
Conical Screw Belt Mixer
Ribbon Blender
Plough-shear Mixer
Double Shaft Paddle Mixer
Hot Products
01
High Quality Customizable CM Series Mixer from China Suppliers | Factory Direct Continuous Mixing Solution
Equipment Specifications
| Total volume | 0.3-30cbm |
| Capacity per hour | 5-200cbm |
| Motor power | 3kw-200kw |
| Material | 316L, 304, mild steel |
Description
The CMS (Continuous single shaft plough mixer), focus on mixing, it can also be used as conveyor. With the special inner structure, it can adapt to a certain range of the feeding speed to achieve relevant productivity. With the uniform speed feeding equipment, it can mix material in a wide range, and make sure the consistency and stability of all the product.
CMD ( continuous double shaft paddle mixer) is characterized by maximizing the productivity. Materials are scattered during the vigorous mixing process, diffused and nobbed between the meshing space of the twin shafts. It can be applied to mix fiber and granules.
The SYCM series continuous mixer continuously inputs different materials into the equipment according to the set ratio, and adjusts the speed of the conveying equipment, the rotation speed of the mixer and the discharge speed to control the residence time of the materials in the cylinder, truly It realizes the continuous mixing production operation of feeding and discharging materials at the same time, and can be matched with large-scale production lines. It can ensure the consistency and stability of the output material products while mixing evenly, and can configure different sizes of equipment to meet the overall production line output. Widely used in food, building materials, mining, chemical and other industries.
The SYCM series has four options to choose from: plow type, ribbon type, paddle type, and double-shaft paddle type. In addition, flying knives can be added for materials that are easy to agglomerate and agglomerate. According to the different characteristics of the materials And choose different options to meet the needs of different industries.
Notice for continuous mixer
- 1. Make sure the stable and continuous feeding.
- 2. Make correct feeding speed ratio in accordance to the material formula.
- 3. Equipment under the discharging should handle the material in time and make sure no blockage of the material when discharging.
- 4. Small additives less than 5%, should be premixed before loading to continuous mixer.
- 5. Mixer productivity is determined by the speed of feeding system. Mixer model and size are determined by productivity, homogeneity and material property.
Frequently Asked Questions
What is the capacity range of the continuous mixer?
The continuous mixer has a capacity per hour ranging from 5 to 200 cbm, with a total volume ranging from 0.3 to 30 cbm, depending on the specific model and configurations.
What material configurations are available for these mixers?
The equipment can be manufactured using high-quality materials including 316L stainless steel, 304 stainless steel, and mild steel to suit different industrial requirements.
What is the main difference between CMS and CMD mixers?
The CMS (Continuous Single Shaft Plough Mixer) focuses on mixing and conveying with feeding speed adaptability. The CMD (Continuous Double Shaft Paddle Mixer) maximizes productivity by scattering, diffusing, and nobbing materials between the twin shafts, making it ideal for fibers and granules.
How does the SYCM series achieve continuous mixing production?
The SYCM series continuously inputs different materials according to a set ratio. By adjusting the conveying speed, rotation speed, and discharge speed, it controls the residence time of the materials to realize simultaneous feeding, mixing, and discharging.
What options can be added to the SYCM series for agglomerated materials?
The SYCM series offers plow, ribbon, paddle, and double-shaft paddle types. For materials that are prone to agglomerate and lump, flying knives can be added to ensure consistent mixing.
How should small additives (less than 5%) be handled?
Any small additives that make up less than 5% of the material formula should be premixed before they are loaded into the continuous mixer to guarantee optimal homogeneity.