Umxubi weCM Series oMgangatho oPhezulu onokwenziwa ngokwezifiso

I-CMS (Continuous single shaft plough mixer), egxile ekuxubeni, ingasetyenziswa njenge-conveyor. Ngolwakhiwo olukhethekileyo lwangaphakathi, inokuziqhelanisa noluhlu oluthile lwesantya sokondla ukuze ifumane imveliso efanelekileyo. Ngezixhobo zokutyisa ezikhawulezayo ezifanayo, inokuxuba izinto kuluhlu olubanzi, kwaye iqinisekise ukuhambelana nokuzinza kwayo yonke imveliso.

I-CMD (umxube we-paddle we-double shaft oqhubekayo) ibonakaliswa ngokwandisa imveliso. Izinto zisasazwa ngexesha lenkqubo yokuxuba enamandla, zisasazwe kwaye zifakwe phakathi kwendawo ye-meshing ye-twin shafts. Ingasetyenziswa kwi-mix fiber kunye ne-granules.

Umxube oqhubekayo we-SYCM series uqhubeka nokufaka izixhobo ezahlukeneyo kwizixhobo ngokwemilinganiselo ebekiweyo, kwaye ulungisa isantya sezixhobo zokuhambisa, isantya sokujikeleza somxube kunye nesantya sokukhupha ukuze kulawulwe ixesha lokuhlala kwezinto kwisilinda, ngokwenene Ufezekisa ukusebenza komxube oqhubekayo wokondla nokukhupha izixhobo ngaxeshanye, kwaye unokufaniswa nemigca yemveliso emikhulu. Unokuqinisekisa ukuhambelana kunye nokuzinza kweemveliso zezinto eziphumayo ngelixa uxuba ngokulinganayo, kwaye unokumisela ubungakanani obahlukeneyo bezixhobo ukuhlangabezana nemveliso iyonke yomgca wemveliso. Isetyenziswa kakhulu ekutyeni, kwizixhobo zokwakha, kwimigodi, kwiikhemikhali nakwamanye amashishini.

Uthotho lwe-SYCM luneendlela ezine onokukhetha kuzo: uhlobo lwe-plow, uhlobo lweribhoni, uhlobo lwe-paddle, kunye nohlobo lwe-paddle olune-shaft ephindwe kabini. Ukongeza, iimela ezibhabhayo zingongezwa kwizixhobo ezilula ukuzihlanganisa kunye nokuhlanganisa. Ngokweempawu ezahlukeneyo zezixhobo kwaye ukhethe iindlela ezahlukeneyo ukuhlangabezana neemfuno zamashishini ahlukeneyo.

1. Qinisekisa ukuba ukutya kuzinzile kwaye kuqhubekeka.

2. Yenza umlinganiselo wesantya sokutya ochanekileyo ngokwefomula yezinto eziphathekayo.

3. Izixhobo eziphantsi kokukhupha itshaja kufuneka ziphathe izinto ngexesha elifanelekileyo kwaye ziqinisekise ukuba akukho kuvalwa kwezinto xa zikhupha itshaja.

4. Izongezo ezincinci ezingaphantsi kwe-5%, kufuneka zixutywe kwangaphambili ngaphambi kokuba zilayishwe kwi-mixer eqhubekayo.

5. Imveliso ye-Mixer imiselwa sisantya senkqubo yokondla. Imodeli kunye nobukhulu be-Mixer kuxhomekeka kwimveliso, ukufana kunye nepropati yezinto ezibonakalayo.